Plumett Jetting Equipment
  Page 1>Page 2
   
 

CLP is the Australia, New Zealand and South Pacific agent for Plumettaz cable jetting machines and winches.
We offer a variety of jetting systems to meet your requirements.

Plumett has developed a wide range of jetting machines for underground and overhead blowing of fibre optical cable.
New additions to the range over 2008, such as the MiniJet, UltimaZ and Lubricator, compliment an already extensive range.

Please call CLP on (07) 3276 7166, for an introduction to this exciting range of Swiss made machines.
Founded in 1923, Plumettaz is a Swiss based company recognized around the world for its expertise in cable laying equipment for the energy and telecommunication industries. Its products are used in more than 60 countries throughout the world. www.plumettaz.com
     
     
MiniJet
  • Easy installation and quick release of the cable, no tools required
  • No maintenance
  • Quick change of the belt
  • No vertical adjustment of the driving device (concentric belt drive) as the cable follows the same axis
  • Possible to achieve long distances
  • Bi-directional
Mini Jet. pdf (431kb)
   
     
CableJet

  • Designed for blowing or floating telecommunication cables (mainly optical fibre, but also small coaxial and multipair cables) in preinstalled ducts
  • Can also be used as an intermediate assist for cascading
  • Possible to achieve long distances
  • Possible to remove old and place new cables in one step
  • Mono-directional
Cable Jet. pdf (154kb)
     
SuperJet H
  • Designed for floating or blowing telecommunication and data transmission cables (mainly optical fibre, but also small coaxial and multipair cables) in preinstalled ducts
  • Can also be used as an intermediate assist for cascading
  • Possible to achieve long distances
  • Possible to remove cables
  • Mono-directional
  • Suitable for the bundle jetting kit
Super Jet .pdf (395kb)

     
Type
Pushing
Max Speed
Rec. Speed
Diam. of
Outer dia.
Max pressure
Dim.
Weight
Force (N)
(m/min)
(m/min)
cable (mm)
of duct (mm)
(bar)
(mm)
(kg)
MiniJet
300
100
60
4 - 16
8 - 40
16
520x375x380
20
Cablejet
300
80
60
9 - 18
20 - 63
12
520x320x230
21
Superjet H
700
60
40
14 - 40
20 - 63
12
915x260x410
37
     
     
MicroJet EM-25
   
MIcrojet EM-25
  • Designed for blowing or floating telecommunication and data transmission microcables (optical fibre, coaxial or multipair) in preinstalled ducts
  • Can also be used as an intermediate assist for cascading
  • Possible to achieve more than 2000m depending on the quality of micro duct route and material, and properties of micro cable
  • Possible to remove old and place new microcables, in one step
  • Bi-directional
EM-25 .pdf (63kb)
   
Micro Jet PRM-196
Micro Jet PRM-196
  • Designed for blowing or floating telecommunication and data transmission microcables (optical fibre, coaxial or multipair) in preinstalled ducts
  • Includes a pneumatic direct drive as well as a detachable and adjustable magnetic torque limiter for fragile microcables.
  • Can also be used as an intermediate assist for cascading
  • Possible to achieve more than 2000m depending on the quality of micro duct route and material, and properties of micro cable
  • Possible to remove old and place new microcables, in one step
  • Bi-directional
PRM-196 .pdf (993kb)
   
ServoJet
  • Designed for the installation of any kind of telecommunication and data transmission microcables with diameter 0.8 to 6 mm into pre-installed microducts
  • Operates as a jetting, pushing or pulling machine
  • Is fitted with a buckle detector giving optimal protection when installing fragile microcables
 

     
UltimaZ
  • Designed for jetting, pushing/ pulling indoor and outdoor FTTH drop micro-cables. It is powered by most types of existing electrical drills and screw drivers with an output torque exceeding 0.3 Nm at 250-500 RPM
  • Light and compact design
  • Ease of use, therefore high daily production and manpower saving
  • Little compressed air consumption, possibility of using compressed air bottles
  • Safety for both personnel and cable
  • To ensure a constant daily production capacity
 

     
Type
Pushing
Max Speed
Rec. Speed
Diam. of
Outer dia.
Max pressure
Dim.
Weight
Force (N)
(m/min)
(m/min)
cable (mm)
of duct (mm)
(bar)
(mm)
(kg)
EM-25 25 50 30-40 <3.5 3-8 16 240x150x190 6.5
PRM-196 Mag
Clutch 		25 50 20 <3.5 3-8 16 280x250x335 6.7
PRM-196 Direct
Drive
150
120
50
3.5 - 8
7 - 12
16
280x250x255
5.6
ServoJet
60
0.8 - 6
3 - 14
UltimaZ V20
20*
40
50
0.8 - 4
3 - 12.7
12
188x101x148
1.7
UltimaZ F
**
40
50
0.8 - 4
3 - 12.7
12
193x101x159
1.4
* Is equipped with an adjustable torque limiter and with a limiter locking device enables high pushing forces
** Is equipped with a torque limiter with fixed setting providing a maximum pushing force ranging between 1 and 15 N in accordance with the customer request. for example: UltimaZ F5.0: pushing force of 5 N / UltimaZ F7.5: pushing force of 7.5 N
     
 
     
Lubricator
  • Designed for the continuous lubrication of microcables in order to enhance longer installation distances at higher installation speed
  • Can be used in conjunction with most PLUMETT jetting equipment like ServoJet, MicroJet, MiniJet and CableJet
  • Can be used with microducts ranging from 4 to 16 mm outer diameter and micro-cables up to 8 mm diameter
 

 
 
     
Y Connector
  • Used to install an additional cable in an already occupied duct.
  • Performance obtained corresponds to at least 50% that achieved with the first cable
  • One branch of the Y-connector, connected to the CableJet/SuperJet, is used for feeding the second cable in the duct
  • Can also be used for the simultaneous installation of 2 cables using two machines
  • Installation distance achieved with two additional cables is nearly the same as that obtained with one cable
Y Conn .pdf (1149kb)

 
 
     
Figaro / Figarino
  • Useful accessories to the "Jetting" system, particularly when the total drum length to be installed exceeds the installation capacity of the available "Jetting" unit(s)
  • Easy portability
  • Set-up by two persons
  • One person operation
  • Due to the open storage basket the Figarino can also be used as an “end storage device” where overlength cable can be stored directly into the Figarino at the end of the duct route; after turning over the stored cable the installation can be continued in the same direction

  PAGE 2>